Menu
VE Commodore
Cold Air Intake Systems
Exhaust System
Rear Section

Throttle Body Spacer
Monaro
Cold Air Intake Systems
Exhaust System
Throttle Body Spacer

Shipping Costs

Contact Details
Australia
Cruisin On
Allan & Debs Baynes
41 Ellenbrook Drive
The Vines. WA. 6069
Phone/Fax 618 9297 3489

cruisinon@iinet.net.au
VE Commodore
Cold Air Intake Systems


Vararam Industries was created to bring true racing technology to the street, the most efficient air induction systems on earth. Our air induction systems produce more Power and Torque, offering you more real world performance than any of the other intake system out there, We've been tested to be the best, compared to the rest and each time VR comes out on top. VR systems are guaranteed to be the best or we will buy them back. We are true air induction specialists, we don't sell hot air, just real world performance. We use the latest in aerodynamic technology and real world testing to produce our intake components. Most VR systems take up to a year to develop. We use a very tedious testing process of evaluating a particular applications true restrictions and reducing them to zero, we then try to force feed the engine or tune the system to a particular application. This maximizes the overall performance of that vehicle, for instance, Trucks. We made Torque and Power UNDER the curve our priority, not peak power, this maximizes the performance of this particular type of vehicle. Another example would be the GM LS line of engines, here we identified the point of restriction and created the VRX line of throttle bodies(coming soon...), these are all over 100% efficient and use a self contained venturi system to boost flow at every RPM range maximizing the overall power curve. At VR we are specialists and all of our products take time, so if you are in a hurry buy the other guys stuff, but if you want to set records and win races Run a VR, they are always worth the wait.

Patrick Ledford CEO
A little bit more time is required to instal using normal tools.


At a glance:

� Produces a real-world 35hp+
� A direct bolt on
� No chopping or cutting on the car
� Unreal throttle response
� Flows 1400-2000CFM+! (Depending on the filter used)
� Reduces 0-60mph by a full � second! (As tested 5.2 stock vs 4.7 & 4.65 best with
VR system NO TUNING!) With a tune, we saw 4.4 sec but no grip to go faster.
� Reduces � mile ET by 3 tenths and adds +3mph Minimum Guaranteed, or we will
take the unit back and pay shipping both ways!
� (NO TUNING) with tuning you will go even quicker.


VE 6.0L/6.2L V8
Ram air V
Cold Air Intake System

Code VRVEAIV8
$620.00 AUD+GST
($682.00)

P/H 5Kg

Front

Back

Engine bay fitted

TOP


This is a true Cold Air Intake system designed and molded to fit the Commodore VE. Roto-Fab's approach was to design a system that incorporates all of the features necessary to maximize performance and air flow without regards to difficulty or tool expense. Roto-Fab started with an air box that is a complete, one-piece molded unit extending downward and outboard of the frame rail. This is crucial since the radiator fans fill the engine compartment with extremely hot air. The box was designed to maximize filter size while creating good alignment for the MAF sensor and the duct work to the throttle body. The open top combined with the hood seal allows the most air possible to all areas of the filter while maintaining a barrier against harmful engine and radiator heat. Also, the exposed filter looks very impressive when you pop your hood!
Full USA Import made to fit the Pontiac G8 so fits our VE.


VE 6.0L/6.2L V8
Cold Air Intake System

Code RFAIV8
$480.00 AUD+GST
($528.00)

P/H 5Kg



Vicki's VE SS, Perth


VE 6.0L/6.2L V8
Cold Air Intake System
With Carbon Fibre Intake Tube

Code RFAIV8CF
$680.00 AUD+GST ($748.00)

P/H 5Kg


VE 3.6L V6
Cold Air Intake System

Code RFAIV6
$500.00 AUD+GST ($550.00)

P/H 5Kg

TOP

Exhaust Systems


BORLA PERFORMANCE INDUSTRIES is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such "concours classics" as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today�s performance vehicles for the street, off-road, and racing.

BORLA is committed to providing world-class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds several US patents for innovative exhaust system technology, and the company has won numerous "Best New Product" awards in the industry. Every BORLA Cat-Back� system, Header and Rear Section is made from austenitic stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance.

The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine�s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.

Millions of exhaust systems are replaced every year due to corrosion and poor performance. Automotive exhaust gases are a mix of carbon monoxide, oxides of nitrogen, unburned hydrocarbons and moisture. These gases condense and attack the system internally. Elements such as corrosive salts, moisture and mud contribute to exterior deterioration. These elements combined with equipment vibration, high temperatures, emission control requirements, uneven road surfaces, and varying traffic patterns make it easy to understand the need and demand for a long-lasting exhaust system. BORLA systems are built to withstand these destructive conditions -- we guarantee it for a Million Miles.

BORLA exhaust is built of aircraft-quality austenitic stainless steel -- stainless inside and out, not mild steel, not aluminum, not coated aluminum, not just wrapped with stainless on the outside for show. Coating techniques, such as aluminizing, can somewhat prolong the life of mild steel, but coatings suffer at the weld points. And, comparing aluminized steel to T-304 stainless steel is like comparing gold-plated metal to solid gold! T-304 stainless steel has the highest chromium content, making it the most resistant to corrosion and therefore the most desirable material for a long-lasting exhaust system. Note: Only the flanges are not stainless. In our twenty-year experience, we have found the 3/8"--1/2" flanges are so thick they will never affect the performance or longevity of the system.

Million Mile Warranty/1,600,000 Kilometres
BORLA PERFORMANCE INDUSTRIES, INC. warrants its products to the original purchaser of record and for the original vehicle on which the product was installed, against defects in materials and workmanship for one million miles. This does not include blemishes or marring of appearance due to weather, road hazards, lack of maintenance or extremes of heat or cold. This warranty shall apply only if BORLA's examination of the returned product discloses a manufacturing or material defect, and BORLA's sole obligation under this warranty shall be limited to repair or replacement at BORLA's option. Note all attachment to universal mufflers must be made at the nipples; there should be no welding to the shell or end caps as this will void the warranty. No expressed or implied warranties of merchantability or fitness for a particular purpose are hereby made except as otherwise expressly provided herein. In no event shall BORLA PERFORMANCE INDUSTRIES, INC. or any BORLA Dealers or Distributors be liable for any loss, inconvenience or damage, whether direct, incidental, consequential or otherwise.


Commodore VE 6.0L/6.2L 2006/10

Description Exhaust Tips
6.0L/6.2L V8 RWD AT/MT 4 DR Duel Round Rolled Angle Cut
Description Code Exhaust Exit
From Catalytic Converter Back B140287 Duel Split Rear



Scott Blackwoods SSV G8 Western Australia.
Just ask for bigger pictures or to contact Scott direct to talk about the Borla System.
Many thanks Scott for the support. Allan & Debs


$1,800.00 AUD+GST ($1,980.00)

Large Item


Commodore VE 6.0L/6.2L Violator Rear Section

SGG60VS
2.5" VE-SS 6.0L V8 Rear Section w/ Violator Mufflers
The G8/VE SS is a powerhouse but with all those cats, resonators and mufflers, it sounds horrible coming off the showroom floor. This fully stainless Axleback kit will restore some nice aggressive tone and free up about 8 horsepower. Dual wall tips are standard with this system. Installation is extremely easy and takes about 20 minutes and doesn't require a lift or jack stands.


$760.00 AUD+GST ($836.00)

Large Item

TOP

Throttle Body Spacer


The PowerAid� was developed to enhance your vehicle�s off idle to mid range performance and efficiency. The unique �Helix Bore�
desCarbuign of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes
the air molecules to organize and maintain high velocity. The organization and high velocity of the air is extremely beneficial because it helps
to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefits you will see are tremendous
torque gains between 800 to 2500 RPM, and potential increases in your fuel economy, depending on driving conditions.

Our PowerAid Throttle Body Spacers are manufactured from the highest quality Aircraft Grade Billet 6061-T6 Aluminum. Each PowerAid
is specifically designed for your application. Our kits always include the necessary gaskets, hardware, and precision brackets to maintain
proper geometry with the factory components. The PowerAid Spacer can be installed in less than an hour using common hand tools
with no drilling or cutting required.

For the serious Sport Compact enthusiast, we have even more features and benefits for you. Some of our applications are drilled and
tapped to allow for the addition or compatibility with certain nitrous �spray bar� type systems.* We like performance, and now you
can add maximum performance and extreme power to your Sport Compact application without limitations.

While providing you with unbelievable performance, you can feel assured that you have purchased the highest quality performance product.
We are proud to have all our products made in the USA, with genuine American parts. We will always stand behind our products 110%.
All of the PowerAid products carry our Lifetime �No Hassle� Warranty!
.


1997/05 Commodore 5.7L
Code PA200-512-1CO
$160.00 AUD+GST
($176.00)

P/H 250g


2006/10 Commodore 6.0L
Code PA200-606CO
$150.00 AUD+GST
($165.00)

P/H 250g

TOP

Monaro
Cold Air Intake System


Vararam Industries was created to bring true racing technology to the street, the most efficient air induction systems on earth. Our air induction systems produce more Power and Torque, offering you more real world performance than any of the other intake system out there, We've been tested to be the best, compared to the rest and each time VR comes out on top. VR systems are guaranteed to be the best or we will buy them back. We are true air induction specialists, we don't sell hot air, just real world performance. We use the latest in aerodynamic technology and real world testing to produce our intake components. Most VR systems take up to a year to develop. We use a very tedious testing process of evaluating a particular applications true restrictions and reducing them to zero, we then try to force feed the engine or tune the system to a particular application. This maximizes the overall performance of that vehicle, for instance, Trucks. We made Torque and Power UNDER the curve our priority, not peak power, this maximizes the performance of this particular type of vehicle. Another example would be the GM LS line of engines, here we identified the point of restriction and created the VRX line of throttle bodies(coming soon...), these are all over 100% efficient and use a self contained venturi system to boost flow at every RPM range maximizing the overall power curve. At VR we are specialists and all of our products take time, so if you are in a hurry buy the other guys stuff, but if you want to set records and win races Run a VR, they are always worth the wait.

Patrick Ledford CEO
A little bit more time is required to instal using normal tools.


At a glance:

� Produces a real-world 25hp+
� A direct bolt on
� No chopping or cutting on the car
� Unreal throttle response
� Flows 1350-1800CFM+! (Depending on the filter used)
� Reduces � mile ET by 3 tenths and adds +3mph Minimum Guaranteed, or we will
take the unit back and pay shipping both ways!
� (NO TUNING) with tuning you will go even quicker.


2005/Up 5.7L/6.0L V8
VR-SDR
Cold Air Intake System

Code VRMVEAIV8
$540.00 AUD+GST ($594.00)

P/H 5Kg

Top

System

Fitted

Engine bay fitted

 

TOP

Exhaust Systems


BORLA PERFORMANCE INDUSTRIES is the pioneer and leader in the design and manufacture of stainless steel performance exhaust. We began two decades ago as a manufacturer of exhaust systems for such "concours classics" as Rolls-Royce and Ferrari cars and have evolved into the premier manufacturer of today�s performance vehicles for the street, off-road, and racing.

BORLA is committed to providing world-class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds several US patents for innovative exhaust system technology, and the company has won numerous "Best New Product" awards in the industry. Every BORLA Cat-Back� system, Header and Rear Section is made from austenitic stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance.

The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine�s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.

Millions of exhaust systems are replaced every year due to corrosion and poor performance. Automotive exhaust gases are a mix of carbon monoxide, oxides of nitrogen, unburned hydrocarbons and moisture. These gases condense and attack the system internally. Elements such as corrosive salts, moisture and mud contribute to exterior deterioration. These elements combined with equipment vibration, high temperatures, emission control requirements, uneven road surfaces, and varying traffic patterns make it easy to understand the need and demand for a long-lasting exhaust system. BORLA systems are built to withstand these destructive conditions -- we guarantee it for a Million Miles.

BORLA exhaust is built of aircraft-quality austenitic stainless steel -- stainless inside and out, not mild steel, not aluminum, not coated aluminum, not just wrapped with stainless on the outside for show. Coating techniques, such as aluminizing, can somewhat prolong the life of mild steel, but coatings suffer at the weld points. And, comparing aluminized steel to T-304 stainless steel is like comparing gold-plated metal to solid gold! T-304 stainless steel has the highest chromium content, making it the most resistant to corrosion and therefore the most desirable material for a long-lasting exhaust system. Note: Only the flanges are not stainless. In our twenty-year experience, we have found the 3/8"--1/2" flanges are so thick they will never affect the performance or longevity of the system.

Million Mile Warranty/1,600,000 Kilometres
BORLA PERFORMANCE INDUSTRIES, INC. warrants its products to the original purchaser of record and for the original vehicle on which the product was installed, against defects in materials and workmanship for one million miles. This does not include blemishes or marring of appearance due to weather, road hazards, lack of maintenance or extremes of heat or cold. This warranty shall apply only if BORLA's examination of the returned product discloses a manufacturing or material defect, and BORLA's sole obligation under this warranty shall be limited to repair or replacement at BORLA's option. Note all attachment to universal mufflers must be made at the nipples; there should be no welding to the shell or end caps as this will void the warranty. No expressed or implied warranties of merchantability or fitness for a particular purpose are hereby made except as otherwise expressly provided herein. In no event shall BORLA PERFORMANCE INDUSTRIES, INC. or any BORLA Dealers or Distributors be liable for any loss, inconvenience or damage, whether direct, incidental, consequential or otherwise.


Monaro 2005/06
#B140165 and #140351 are the same except for the Tip size.
Description Exhaust Tips
6.0L V8 RWD AT/MT 2 DR Single Round Rolled Angle Cut Lined 5" Tips
Description Code Exhaust Exit
From Catalytic Converter Back B140165 Split Rear



$1,800.00 AUD+GST ($1,980.00)

Large Item


Monaro 2005/06
#B140165 and #140351 are the same except for the Tip size.
Description Exhaust Tips
6.0L V8 RWD AT/MT 2 DR Single Round Rolled Angle Cut Lined 4" Tips
Description Code Exhaust Exit
From Catalytic Converter Back B140351 Split Rear



$1,800.00 AUD+GST ($1,980.00)
Large Item

Monaro 2001/04

Description Exhaust Tips
5.7L V8 RWD AT/MT 2 DR Duel Round Rolled Angle Cut
Description Code Exhaust Exit
From Catalytic Converter Back B140077 Duel Rear



Doug Curran's Monaro Queensland. No Issue with the different fuel tank position from the GTO to the Monaro.
Just ask for bigger pictures or to contact Doug direct to talk about the Borla System.
Many thanks Doug for the support. Allan & Debs

$1,700.00 AUD+GST ($1,870.00)

Large Item

TOP

Throttle Body Spacer

The PowerAid� was developed to enhance your vehicle�s off idle to mid range performance and efficiency. The unique �Helix Bore�
desCarbuign of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes
the air molecules to organize and maintain high velocity. The organization and high velocity of the air is extremely beneficial because it helps
to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefits you will see are tremendous
torque gains between 800 to 2500 RPM, and potential increases in your fuel economy, depending on driving conditions.

Our PowerAid Throttle Body Spacers are manufactured from the highest quality Aircraft Grade Billet 6061-T6 Aluminum. Each PowerAid
is specifically designed for your application. Our kits always include the necessary gaskets, hardware, and precision brackets to maintain
proper geometry with the factory components. The PowerAid Spacer can be installed in less than an hour using common hand tools
with no drilling or cutting required.

For the serious Sport Compact enthusiast, we have even more features and benefits for you. Some of our applications are drilled and
tapped to allow for the addition or compatibility with certain nitrous �spray bar� type systems.* We like performance, and now you
can add maximum performance and extreme power to your Sport Compact application without limitations.

While providing you with unbelievable performance, you can feel assured that you have purchased the highest quality performance product.
We are proud to have all our products made in the USA, with genuine American parts. We will always stand behind our products 110%.
All of the PowerAid products carry our Lifetime �No Hassle� Warranty!
.

2001/05 Monaro 5.7L
Code PA200-512-1MO
$160.00 AUD+GST
($176.00)

P/H 250g


2006 Monaro 6.0L
Code PA200-606MO
$150.00 AUD+GST
($165.00)

P/H 250g

TOP