Jeep Wrangler Rugged Ridge XHD Bumpers Cruisin On AUSTRALIA

Durable. Tough. Affordable. The Heavy Duty 10,500 LB Winch from Rugged Ridge is everything you could want in a winch. It is driven by a durable 6.6 HP Series Wound motor for long life and extra pulling power. A tough 3 Stage Planetary Gear box with a 218:1 gear ratio delivering power, and reliability on each and every pull. The Heavy Duty 10,500 LB Winch has more power and exclusive features than any other winch in its price range: Stainless Steel Hardware- All the exterior winch body screws and bolts are Stainless steel to prevent rust and provide a long life. All Rugged Ridge steel cable style Winches include off road light mount roller fairleads allowing for the easy mount of two off road lights! Special Solenoid mounting brackets allow for multiple solenoid mounting points and the ability to tilt the Solenoid for ease of use. This “tilt” feature ensures that each Rugged Ridge winch can be used with almost all off-road bumpers and over riders! Limited 2 year warranty against manufacturing defects (1 Year on electrical). Each winch has been independently tested to ensure they meet or exceed all specifications.

JK Wrangler 07/Up XHD Front Bumper
Wrangler 2007/Up XHD Front Bumper Textured Black With Winch Mount Code 11540.10 $700.00 AUD+GST ($770.00) P/H Large Item BLACK RUGGED RIDGE XHD FRONT BUMPER WITH WINCH MOUNT, JEEP WRANGLER (JK) 2007/Up The XHD Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch (including the new Warn Power Plant with optional mounting blocks #11540.15) and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look
Wrangler 2007/Up XHD Front Bumper Textured Black Without Winch Mount Code 11540.11 $700.00 AUD+GST ($770.00) P/H Large Item BLACK RUGGED RIDGE XHD FRONT BUMPER WITHOUT WINCH MOUNT, JEEP WRANGLER (JK) 2007/Up The XHD Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look
Wrangler 2007/Up XHD Front Bumper Stainless Steel Without Winch Mount Code 11540.71 $1,800.00 AUD+GST ($1,980.00) P/H Large Item STAINLESS STEEL RUGGED RIDGE XHD FRONT BUMPER WITH WINCH MOUNT, JEEP WRANGLER (JK) 2007/Up The XHD Short Base comes in two designs; Integrated Winch Mount for use with almost any aftermarket winch and Light Mount Base with two light mounting locations. The Short Base attaches quickly to the frame with two enclosed D-Ring mounting brackets. This four bolt frame mount design provides the toughest bumper attachment found anywhere while creating two overbuilt pull points. This bumper mounts close in on the frame rails, drawing the bumper closer to the body and increasing the approach angle. The narrow overall width gives enormous clearance for the front tires. Each Short Base includes two protected cut outs for your JK's factory fog lamps. Built in euro-guards protect the fog lamps from the elements while creating an easy mount point. Each Short Base includes side filler plates to close off the ends for a finished look.

JK Wrangler 07/Up XHD Front Bumper Ends
Wrangler 2007/Up XHD Front Bumper Ends Textured Black Pair Code 11540.12 $270.00 AUD+GST ($297.00) P/H Large Item BLACK RUGGED RIDGE XHD FRONT BUMPER ENDS, JEEP WRANGLER (JK) 2007/Up Standard ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each Standard end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Stainless Steel Wrangler 2007/Up XHD Front Bumper Storage Ends Textured Black Pair Code 11540.22 $420.00 AUD+GST ($462.00) P/H Large Item BLACK RUGGED RIDGE XHD FRONT BUMPER STORAGE ENDS, JEEP WRANGLER (JK) 2007/Up Storage ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each Storage end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. Carry all your recovery gear up front and out of the way. A great idea from Rugged Ridge. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD Front Bumper Ends Stainless Steel Pair Code 11540.19 $580.00 AUD+GST ($638.00) P/H Large Item STAINLESS STEEL RUGGED RIDGE XHD FRONT BUMPER ENDS, JEEP WRANGLER (JK) 2007/Up Stainless Steel ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD Front Bumper Tube Ends Textured Black Pair Code 11540.21 $250.00 AUD+GST ($275.00) P/H Large Item TUBE ENDS RUGGED RIDGE XHD FRONT BUMPER ENDS, JEEP WRANGLER (JK) 2007/Up Tube ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD Front Bumper Tube Ends Stainless Steel Pair Code 11540.73 $480.00 AUD+GST ($528.00) P/H Large Item TUBE ENDS RUGGED RIDGE XHD FRONT BUMPER ENDS, JEEP WRANGLER (JK) 2007/Up Tube ends easily mount to any Short Base with six oversized 12mm bolts to turn your short bumper into a full size bumper design. Each end is recessed to provide the ultimate fit with the short bases creating an almost seamless fit. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE

JK Wrangler 07/Up XHD Front Bumper Tubular Bars
Wrangler 2007/Up XHD Front Bumper Hoop Overrider Textured Black Code 11540.14 $100.00 AUD+GST ($110.00) P/H Large Item BLACK RUGGED RIDGE XHD FRONT BUMPER HOOP OVERRIDER, JEEP WRANGLER (JK) 2007/Up Add on a durable Tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes. Will not work with Warm Powerplant Winch W17800. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD Front Bumper Hoop Overider Stainless Steel Code 11540.16 $200.00 AUD+GST ($220.00) P/H Large Item STAINLESS STEEL RUGGED RIDGE XHD FRONT BUMPER HOOP OVERRIDER, JEEP WRANGLER (JK) 2007/Up Add on a durable Tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes. Will not work with Warm Powerplant Winch W17800. FOR USE WITH 11540.10, 11540.11 or 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD Front RRC Mount Tube Bumper Textured Black Mounting for 4 Lights Code 11540.18 $700.00 AUD+GST ($770.00) P/H Large Item RCC MOUNT FRONT XHD BUMPER TEXTURED BLACK, JEEP WRANGLER (JK) 2007/Up NEW XHD Front Bumper Added- Now fits from 1976- UP!. New applications now fit CJ/YJ/TJBy adding 3 part numbers you now can interchange components between 07-Up XHD models and 76-06 models. These 3 part numbers now give Jeep owners 33 years of vehicle coverage! Many existing parts are interchangeable so customers stock less with more vehicle coverage. Also new from 2009, are polished Stainless Steel XHD light mount center section and Standard Ends for JK. With these new Stainless additions, you now have over 100 different bumper options! The RRC mount uses a unique D-ring attachment so you will need separate optional D-rings. The enclosed HDD-rings on the short base will not be used with these two tubular options. ***FOR USE WITH 11540.10, 11540.11 OR 11540.71 XHD FRONT BUMPER BASE
Wrangler 2007/Up XHD RRC Stinger Tube Bumper Textured Black Code 11540.13 $350.00 AUD+GST ($385.00) P/H Large Item STINGER FRONT XHD BUMPER TEXTURED BLACK JK WRANGLER 07-11 Add on a durable .120 wall tubular Hoop Overrider to create the ultimate offroad bumper. These are some tough tubes! The RRC mount uses a unique D-ring attachment so you will need separate optional D-rings. The enclosed HDD-rings on the short base will not be used with these two tubular options. For use with 11540.10, 11540.11 and 11540.40 XHD Front Bumper Bases

JK Wrangler 07/Up XHD Rear Bumper & Tyre Carrier
Wrangler 2007/Up XHD Rear Bumper Textured Black 2&4 Door Code 11546.20 $1,000.00 AUD+GST ($1,100.00) P/H Large Item BLACK RUGGED RIDGE XHD REAR BUMPER, JEEP WRANGLER (JK) 2007/Up Make the most of your rear bumper with our XHD Rear Bumper System. Features easy installation, amazing looks and two reinforced heavy duty D-Ring attachment points. Special "inner mounting plate" provides an extremely secure mounting point - strong enough for offroad use! The two-piece design allows use with and without tire carrier options. Heavy duty powdercoated steel design looks great but is extremely tough. Mount on the optional Tire Carrier and you can hold up to a 35" tyre.
Wrangler 2007/Up XHD Rear Bumper Tyre Carrier Textured Black 2&4 Door Code 11546.22 $600.00 AUD+GST ($660.00) P/H Large Item BLACK RUGGED RIDGE XHD REAR BUMPER TYRE CARRIER, JEEP WRANGLER (JK) 2007/Up The perfect addition to the XHD rear bumper is the matching XHD Tire Carrier Mount. The latch uses a door handle mechanism for durability and a great matching appearance. The massive hinge supports up to a 35" tire and has a locking pin to keep the arm in place on the even steepest grade.

JK Wrangler 07/Up XHD Rear Bumper Accessories
Wrangler 2007/Up Tyre Carrier Recovery Bag 2&4 Door Code 12801.50 $90.00 AUD+GST ($99.00) P/H Large Item TYRE CARRIER RECOVERY BAG, BLACK, FITS RUGGED RIDGE RRC, XHD AND CLASSIC TIRE CARRIERS, JEEP CJ 76-86, WRANGLER (YJ) 87-95, (TJ) 97-06, (JK) 07-11 The TCR (Tyre Carrier Recovery) bag has been designed to mount to Rugged Ridge RRC, XHD and Classic rear tire carrier bumpers. This bag allows the storage of all your recovery gear between the A-frame uprights on your rear tire carrier and in the process, helping to free up valuable space inside your Jeep. The bag is constructed of a weather resistant material and features a zipper flap to help protect your gear from the environment. Each bag attaches easily with four heavy duty nylon straps that allow for quick removal and transport using the attached grab handle. When attached to the tire carrier simply swing open to reveal the easy access zipper designed for quick removal and replacement of your recovery gear..
Wrangler 2007/Up Tyre Carrier Linkage 2&4 Door Code 11503.91 $75.00 AUD+GST ($82.50) P/H Large Item TYRE CARRIER LINKAGE, FOR USE WITH RUGGED RIDGE XHD REAR BUMPER AND TIRE CARRIER, JEEP WRANGLER (JK) 2007/Up Has opening your reat tailgate become a burden since you added a swing out tire carrier? Has it become easier to crawl over the rear seat, to grab your gear, then hassling with the tire carrier? The Rugged Ridge Tyre Carrier Linkage Kit eliminates the issue and makes accessing the cargo area quick and painless. Once installed, the linkage mates the tire carrier to the tailgate, so botjh are open in a single fluid movement. The Tyre Carrier Linkage is designed to work with Rugged Ridge XHD, RRC, and Rock Crawling rear bumpers and tire carriers, but will also work with most aftermarket tire carriers. No drilling is required to mount the linkage to the tailgate, but some minor drilling is required to mount the linkage to the tire carrier.

Recovery Gear Kits
Recovery Gear Kit Code 15104.25 $180.00 AUD+GST ($198.00) P/H Large Item RECOVERY GEAR KIT, RUGGED RIDGE, UNIVERSAL APPLICATION The Rugged Ridge Recovery Kit includes everything you need to help your buddy next time he gets stuck in the mud. The durable carrying case is filled with a beefy pair of 9,500lb D-Rings, a 20,000lb Snatch Block Pulley, the Rugged Ridge Winch Line Dampener, 2" x 30' 20,000lb Recovery Strap, 3" x 6' 30,000lb Tree Trunk Protector Strap, and a pair of leather Recovery Gloves. It is everything you could ever want, except for the koozie you will need to keep your drink cold, when your buddy pays you back by mowing your lawn. Kit includes: Durable Recovery Gear Bag. Heavy Duty 8" 20,000lb Snatch Block Pulley. Premium 2" x 30' 20,000lb Recovery Strap. Premium 3" x 6' 30,000lb Tree Trunk Protector, Heavy Duty 9,500lb zinc coated pair of D-Rings. Winch Line Dampener. *Pair of leather Recovery Gloves..
UTV/ATV Recovery Gear Kit Code 15104.27 $120.00 AUD+GST ($132.00) P/H Large Item UTV/ATV RECOVERY GEAR KIT, RUGGED RIDGE, UNIVERSAL APPLICATION The Rugged Ridge Recovery Kit includes everything you need to help your buddy next time he gets stuck in the mud. The durable carrying case is filled with one 7,500 D-Ring, a 20,000lb Snatch Block Pulley, 1" x 15' 10,000lb Recovery Strap, 2" x 6' 20,000lb Tree Trunk Protector Strap, and Tyre repair kit.

JK Wrangler 07/Up RRC Rock Sliders
Wrangler 2007/Up RRC Rock Slider Textured Black 4 Door Code 11504.22 $810.91 AUD+GST ($892.00) P/H Large Item BLACK RUGGED RIDGE RRC ROCK SLIDERS 4 DOOR, JEEP WRANGLER (JK) 2007/Up The true Rock Crawling design puts protection tight up under the side of your Wrangler while adding a special side "hoop" to block large outcroppings. Special frame mounted design provides secure, bounce-free installation while keeping the mounting points above the bottom of the frame for greater ground clearance. New 2007 Wrangler/Up modles attach to the body frame mounts for a no-drill instillation. Will fit Rubicon models, but factory rocker guard must be removed.
Wrangler 2007/Up RRC Rock Sliders Textured Black 2 Door Code 11504.23 $600.00 AUD+GST ($660.00) P/H Large Item BLACK RUGGED RIDGE RRC ROCK SLIDERS 2 DOOR, JEEP WRANGLER (JK) 2007/Up The true Rock Crawling design puts protection tight up under the side of your Wrangler while adding a special side "hoop" to block large outcroppings. Special frame mounted design provides secure, bounce-free installation while keeping the mounting points above the bottom of the frame for greater ground clearance. New 2007 Wrangler/Up modles attach to the body frame mounts for a no-drill instillation. Will fit Rubicon models, but factory rocker guard must be removed..

JK Wrangler 07/Up RRC Side Armor Steps
Wrangler 2007/Up RRC Side Armor Steps Textured Black 4 Door Code 11504.20 $700.00 AUD+GST ($770.00) P/H Large Item BLACK RUGGED RIDGE RRC SIDE ARMOR STEPS 4 DOOR, JEEP WRANGLER (JK) 2007/Up Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge's Side Armor. Built from heavy-duty 2" x 0.120" black texture powdercoated steel tubing, these guards will take the beating that was meant for your body sheetmetal. Simple bolt-on design utilizes existing body mount locations for a secure, rattle free installation. The black texture finish resists scratches and gives a slip-resistant surface for door entry. Sold as a pair and includes all necessary installation hardware. Will fit Rubicon models, but factory rocker guard must be removed.
Wrangler 2007/Up RRC Side Armor Steps Textured Black 2 Door Code 11504.21 $600.00 AUD+GST ($660.00) P/H Large Item BLACK RUGGED RIDGE RRC SIDE ARMOR STEPS 2 DOOR, JEEP WRANGLER (JK) 2007/Up Keep your rocker panels from being beaten to a pulp on the trail with Rugged Ridge's Side Armor. Built from heavy-duty 2" x 0.120" black texture powdercoated steel tubing, these guards will take the beating that was meant for your body sheetmetal. Simple bolt-on design utilizes existing body mount locations for a secure, rattle free installation. The black texture finish resists scratches and gives a slip-resistant surface for door entry. Sold as a pair and includes all necessary installation hardware. Will fit Rubicon models, but factory rocker guard must be removed.

Did You Know Rugged Ridge 10,500lb Synthetic Rope Winch