  |
|
|
Pypes introduces the Corvette (C3) Exhaust System.
The C3 has long been over looked when it comes to performance exhaust. For those of you who want to enjoy your C3's power, then you'll want one of these custom Pypes Systems. Designed to connect directly to your manifolds (or headers), this system includes a custom fit X-pipe and high-performance Mufflers and are constructed of 409 Stainless Steel.
This system includes the X-pipe, tailpipes, mufflers, hangers and clamps! Finally a mandrel bent PERFORMANCE system for the C3 Corvette. A dual hump crossmember must be used for proper installation. 1968-73 owners must modify and use their own tips. |
|
Corvette C3 1968/74 StreetPro System
SCC12S
2.5" Corvette C3 Crossmember-back System w/ StreetPro Mufflers
1968-1974 owners will need to reuse their own valance tips and reweld hanger wire form. 78-80 owners will need to add a dual hump crossmember if not already installed.
1973 CARS MUST use either off set/ center muffler or 70-72 style tip.
73 cars have center discharge tips CAUTION information has not been varified
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
$1,300.00 AUD+GST ($1,430.00)
Large Item
Corvette C3 1975/81 StreetPro System
SCC10S
2.5" Corvette C3 Crossmember-back System w/ StreetPro Mufflers
81-82 owners can't use a early vette crossmember but can use a 200R4 crossmember from bowtie overdrive.
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
1975-1981 owners will need to add a dual hump crossmember. When using headers owners must complete the connection between the headers and the system. See instructions for details.
$1,330.00 AUD+GST ($1,463.00)
Large Item |
|
Corvette C3 1968/74 RacePro System
SCC12R
2.5" Corvette C3 Crossmember-back System w/ RacePro Mufflers
1968-1974 owners will need to reuse their own valance tips and reweld hanger wire form. 78-80 owners will need to add a dual hump crossmember if not already installed.
1973 CARS MUST use either off set/ center muffler or 70-72 style tip.
73 cars have center discharge tips CAUTION information has not been varified
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
$1,300.00 AUD+GST ($1,430.00)
Large Item
Corvette C3 1975/81 RacePro System
SCC10R
2.5" Corvette C3 Crossmember-back System w/ RacePro Mufflers
81-82 owners can't use a early vette crossmember but can use a 200R4 crossmember from bowtie overdrive.
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
1975-1981 owners will need to add a dual hump crossmember. When using headers owners must complete the connection between the headers and the system. See instructions for details.
$1,330.00 AUD+GST ($1,463.00)
Large Item |
|
Corvette C3 1968/74 Violator System
SCC12V
2.5" Corvette C3 Crossmember-back System w/ Violator Mufflers
1968-1974 owners will need to reuse their own valance tips and reweld hanger wire form. 78-80 owners will need to add a dual hump crossmember if not already installed.
1973 CARS MUST use either off set/ center muffler or 70-72 style tip.
73 cars have center discharge tips CAUTION information has not been varified
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
$1,300.00 AUD+GST ($1,430.00)
Large Item
Corvette C3 1975/81 Violator System
SCC10V
2.5" Corvette C3 Crossmember-back System w/ Violator Mufflers
81-82 owners can't use a early vette crossmember but can use a 200R4 crossmember from bowtie overdrive.
Pypes Exhaust Systems are designed to deliver enhanced performance, provide extra punch in the passing lane and improve gas mileage. Fabricated using the highest quality materials, our 16 gauge, mandrel-bent, stainless steel pipe ensures maximum exhaust gas flow, which can significantly boost horsepower. The stainless construction of our pipes and mufflers enables them to resist corrosion and extends the life of the system. Our mufflers are also stainless constructed and precision matched to deliver the ultimate in sound and performance. Stainless X-pipe, tailpipes, clamps and hangers make the Pypes system unmatched by any other system on the market. These systems can be installed at home without any special tools.*
*(some cutting may be required) Use DCC10 SB 2.25" Manifold downpipes to complete.
1975-1981 owners will need to add a dual hump crossmember. When using headers owners must complete the connection between the headers and the system. See instructions for details.
$1,330.00 AUD+GST ($1,463.00)
Large Item |
